EBR Works

Received the new pack from John and the issue is resolved. Thanks for the help.

Getting another pack from John Andrewski . Possibly may resolve the issue. We'll see..

I have tried to find another pack to try. Cannot find them in stock with any vendor.

I contacted John Andrewski and he is going to help me with this. Thanks!

Some more photos: Difficult to get a good measurement, but the top of the sear appears to be about .180" above the tube wall. There seems to be excessive diameter of the tube, which leads to this photo. I just noticed that there appears to be a hairline crack in the tube directly above the sear: It appears that someone attempted another repair to the right of the crack. Can you recommend a qualified gunsmith that could repair this? Thanks.

We have a Stenling gun that was built on an early CATCO tube. The issue is that the bolt will consistently over-ride the sear and render 2-3 round bursts on semi and run-ons of 2-3 round in FA after trigger release. If the bolt if pulled fully back on an empty chamber and released without touching the trigger, about 50% of the time the sear is over-ridden. Slow mo video of this: A photo of the sear: I would appreciate any feedback on how to address this issue. A photo of the gun for those that want to see it: Thanks very much!