Kenshi Posted March 11, 2011 Report Share Posted March 11, 2011 Can any one shed additional light on the story behind the Mk21 Mod0 US Navy Viet Nam conversion of the M1919A4 where it was barreled to 7.62x51mm and used the M13 link which was also used with the M60 machine gun? Anyone on the board have one that they could do a virtual or pictorial walk around? I am looking for any and all data including actual mil specifications, pictures, Mod kits, drawings, manuals, and personal commentary. Also a pic of how it was identified on the right side plate would be really nice. Not much is really known about this version/mod of the iconic M1919A4 and what is commonly known would barely fill this page. Link to comment Share on other sites More sharing options...
Kenshi Posted March 23, 2011 Author Report Share Posted March 23, 2011 (edited) Here are three pics from the web that show a Mk21 Mod0. Look closely at the belted ammo and you can see the M13 links with the brass peeking through the open portion of the link facing up. The muzzle break was also singular to this Mark. http://img708.imageshack.us/img708/7131/mk21mod0r44.jpg http://img26.imageshack.us/img26/7457/mk21mod0.jpg http://img232.imageshack.us/img232/1594/mk21mod0r45.jpg Edited March 24, 2011 by Kenshi Link to comment Share on other sites More sharing options...
DanG Posted April 11, 2011 Report Share Posted April 11, 2011 I can't answer your questions, but I can show you what happened to a lot of them... DanG http://i266.photobucket.com/albums/ii254/D.../9-21-10074.jpg Link to comment Share on other sites More sharing options...
Kenshi Posted April 22, 2011 Author Report Share Posted April 22, 2011 I can't answer your questions, but I can show you what happened to a lot of them... DanG http://i266.photobucket.com/albums/ii254/D.../9-21-10074.jpg Thanks Dan, You have answered one of the issues that no one had an answer for. That issue is how the side plate was identified!! Link to comment Share on other sites More sharing options...
Kenshi Posted September 4, 2012 Author Report Share Posted September 4, 2012 (edited) Hi all, Some time has passed and I am happy to say that I have almost completed a drawing package of the Mod and parts necessary to turn a M1919A4 into a Navy Mk21 Mod0 gun alowing it to feed using the M13 links used in the M60 and M240 GPMGs. I am lacking a couple of parts drawings in that package, the Mk21 Flash Hider, the rear belt pawl and the MK21 top cover belt feed pawl. Those parts are still being searched for. Here a two photos of a cut receiver section on a Mk21, one can see the link support on the right side, and the belt pawls and the round stop. http://img838.imageshack.us/img838/7567/copyofmgmk215.jpghttp://img692.imageshack.us/img692/7451/mgmk211.jpg Using an Izzy 7.62NATO Top Cover and Feed Pawl, and the wider Izzy LH Belt Pawl AND the MK21 parts necessary to support the M13 links the gun feeds great. Edited September 7, 2012 by Kenshi Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now