tnw50cal
Regular Group-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by tnw50cal
-
There are a lot of M96s out there with the first type gas piston/op-rod . Robinson offered up a fix for this but most were never converted as Robinson wanted to charge for the fix. With Robinson not supporting the M96, I thought I post a fix from back then.The type 1 piston was held onto the op-rod with a roll pin that would work it's way out until it hit the inside of the gas tube causing a wear line in the tube. If left long enough it caused stoppages. I put a center punch in both sides of the roll pin and hit one side while supporting the other center punch there by spreading the ends of the roll pin. This kept the roll pin centered. When replacing the roll pin I just squeezed the end with pliers and pushed it out.
- 1 reply
-
- 1
-
The last month or so a seller on Gunbroker has been selling demilled Stoner 63 parts. I won 2 of the demilled barrel carrying handles he was selling. The only part(s) demilled is the wooden handle and half the 5/16 rod inside it. The 2nd one I won still has a 8 inch piece of Stoner 63 heavy barrel in it. The Robinson M96 top feed(Bren gun) barrel is the exact same diameter as the stoner barrel. So the Stoner 63 carrying handle will fit perfect on the top feed barrel. All I need to do is make new wooden handles and weld a 2 inch piece of rod on that's inside the wood handle as well as mill a small 1/32 inch half moon slot into the top of the barrel just in front of the step down(this keeps the carrying handle bracket from turning on the barrel). I bought 2 handles because I bought a extra top feed barrel from Robinson back when I bought my top feed kit. So I guess more than just the buttstock from a Stoner will fit on a M96. Now I just need a Stoner 63 bipod.
-
Welcome Back
tnw50cal replied to bug's topic in Robinson Armament Company M96 Expeditionary Rifle Discussion Forum
Hi, I was on the old forum, at first as "gn", then as "out there". Still have my Recon and top feed(Bren) M96s. Haven't shot them in years due to lack of parts and support from Robinson. Still can't bring myself to sell them though. Really love the top feed. I should add that I only had the bolt tail upgrade done to the top feed, but not to the Recon. I didn't have the trigger upgrade done on either.