komodoj Posted February 8, 2023 Report Share Posted February 8, 2023 Anyone know if this will fit the WWII variant M1a1? Since buttplates are Hens teeth? https://shopkahrfirearmsgroup.com/firearm-parts/thompson-m1sb-5-buttplate-27-5-t1.asp Link to comment Share on other sites More sharing options...
anjong-ni Posted February 8, 2023 Report Share Posted February 8, 2023 The Kahr M1 plate has no oil-bottle-door in the back if that's important to your needs. ...Phil Link to comment Share on other sites More sharing options...
komodoj Posted February 8, 2023 Author Report Share Posted February 8, 2023 17 minutes ago, anjong-ni said: The Kahr M1 plate has no oil-bottle-door in the back if that's important to your needs. ...Phil Nah for now. But will it fit? Thank you. Link to comment Share on other sites More sharing options...
ppgcowboy Posted February 8, 2023 Report Share Posted February 8, 2023 Have you looked on gunbroker,I see a few there. Are those prices the going rate? Link to comment Share on other sites More sharing options...
komodoj Posted February 8, 2023 Author Report Share Posted February 8, 2023 To be honest not a fan of Gunbroker. A lot of shill bidders on there. Not sure of going prices. I have seen them from $20-$150? Would like to buy from a member on here or a site if applicable. Link to comment Share on other sites More sharing options...
Steelflood Posted February 8, 2023 Report Share Posted February 8, 2023 Gunbroker has been running higher, I got some GIs with doors for 30 each....and I remember the price because I've seen them upwards of 80 on gunbroker. I have to get some sleep but I'll check one piece in my armory and see if it looks like a match. I remember the piece in the armory becasue the plate is too small for the Thompson stock that is either USGI or a stock made to USGI dimension. I didn't notice the substantial size difference until I had several guns lined up and was looking at like 5 butts all together...get it, I was looking at butts. If you don't care about things like doors and the like, dm me, because I put some time into solving the problem you describe. Link to comment Share on other sites More sharing options...
Steelflood Posted February 8, 2023 Report Share Posted February 8, 2023 10 hours ago, komodoj said: Anyone know if this will fit the WWII variant M1a1? Since buttplates are Hens teeth? https://shopkahrfirearmsgroup.com/firearm-parts/thompson-m1sb-5-buttplate-27-5-t1.asp I found some chatter on this board about parts interchangeability....and one member in 2006 asserted this: (All of the new Kahr semi-autos I've seen used M1 buttstocks.) This question has been covered so many times, be assured you can find the answer in the forum archives, or just wait for everyone to wake up this morning.... Link to comment Share on other sites More sharing options...
komodoj Posted February 8, 2023 Author Report Share Posted February 8, 2023 2 hours ago, Steelflood said: Gunbroker has been running higher, I got some GIs with doors for 30 each....and I remember the price because I've seen them upwards of 80 on gunbroker. I have to get some sleep but I'll check one piece in my armory and see if it looks like a match. I remember the piece in the armory becasue the plate is too small for the Thompson stock that is either USGI or a stock made to USGI dimension. I didn't notice the substantial size difference until I had several guns lined up and was looking at like 5 butts all together...get it, I was looking at butts. If you don't care about things like doors and the like, dm me, because I put some time into solving the problem you describe. Dm sent Link to comment Share on other sites More sharing options...
Motorcar Posted February 8, 2023 Report Share Posted February 8, 2023 https://www.gunbroker.com/item/969781185 I know you said you don't like Gunbroker but....it's not mine just passing it along. Link to comment Share on other sites More sharing options...
komodoj Posted February 8, 2023 Author Report Share Posted February 8, 2023 21 minutes ago, Motorcar said: https://www.gunbroker.com/item/969781185 I know you said you don't like Gunbroker but....it's not mine just passing it along. Thank you. Way higher than I want to pay. Worse case scenario if I can’t find one for a “Fair” price I’ll make one. Link to comment Share on other sites More sharing options...
signal_4 Posted February 12, 2023 Report Share Posted February 12, 2023 On 2/8/2023 at 5:22 AM, Steelflood said: I found some chatter on this board about parts interchangeability....and one member in 2006 asserted this: (All of the new Kahr semi-autos I've seen used M1 buttstocks.) This question has been covered so many times, be assured you can find the answer in the forum archives, or just wait for everyone to wake up this morning.... I pulled the plate off my Kahr Semi M1 and it did infact have a GI but stock with the hole for the oil bottle behind it. Link to comment Share on other sites More sharing options...
Steelflood Posted February 13, 2023 Report Share Posted February 13, 2023 20 hours ago, signal_4 said: I pulled the plate off my Kahr Semi M1 and it did infact have a GI but stock with the hole for the oil bottle behind it. I didn't think to confim that I just started using some software that you just make an outline, then it accepts any form of data, pdf, video, webpage grab, anything, like this. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now