M17ap
Regular Group-
Posts
112 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Everything posted by M17ap
-
Flat ejectors for sale (Merle made)
M17ap replied to deerslayer's topic in Thompson Submachine Gun Message Board
I will take 2 pm sent , thx , -
Thompson Barrel Wrench ?
M17ap replied to thirtyround's topic in Thompson Submachine Gun Message Board
Wrench is sold on eBay. Do a search for barrel vise or barrel wrench. Seller has about a dozen different wrenches for different guns. Good quality heavy wrench. Not listed as a thompson wrench though. HTH -
Back in the mid seventies R J Perry bought Winchesters-military smallarms and Cody got the lever action rifles and shotguns. Some of the guns had adheisive aluminum property numbers on the stocks. There were several m2’ s for sale on Perry’s listing at the time. I bought one like the one in your pics . On the stock was a taped piece of paper pretty brown from age hand written Experimental gun. The tape was cracked and dark yellow not clear like todays scotch tape. Wish I had taken pictures . Sold it to D Todd years ago. Gun had no military proofs as it was an in factory gun never issued. I believe the price was $ 600 back then. Was an overstamped M2 shot great. Those were the good old days !
-
Best solution for a tight Mp40 magwell
M17ap replied to cavalry's topic in The MP38-40 - 43/44 Message Board
Try using a nut and bolt that fit inside your mag housing. Hex head type. Put a wrench on each side then slowly back the nut off the bolt. This should expand the mag housing side to side so your mag will slide in and out easily. It’s trial and error just go a 1/4 turn and try mag. Don’t over do it. Sometimes people put the mag housing in a bench vise to hold barreled receiver. Clamping too tight will cause mag housing to close making insertion of mags hard or tight. HTH -
Standard model 50 has no dust cover like m16 or mat 49 smg. How about some pictures ? Might help your search. Rich
-
Thompson Drum Greaser Tool For Sale
M17ap replied to Ryo's topic in Thompson Submachine Gun Message Board
I will take one , first class $38.00 . PM to follow. Thanks M17ap ( Rich ) -
9mm Grease Gun for sale in France
M17ap replied to Annihilator's topic in The U.S. M3-M3A1 Message Board
-
9mm Grease Gun for sale in France
M17ap replied to Annihilator's topic in The U.S. M3-M3A1 Message Board
Deer gun is an lmproved Liberator pistol. Has an aluminum frame , is still single shot. Used by CIA in 50’ s and 60 ‘s. Size similar to Liberator. Will try to post pics ! -
attachment of sling on M1A1
M17ap replied to laurencen's topic in Thompson Submachine Gun Message Board
Looks like a mac 10 holster set up. Back in 80’s lots of stuff made as accessories for Macs. One was shoulder holster with same snap set up. Mags on left Mac on right. All you had to do was grab grip rotate barrel Up and fire. Snaps hung gun on your side. Great concealment under your coat. Looks like someone customized the M1 stock for same set up. Probably put snap retainers on a piece of old web sling so the M1 could hang from shoulder for quick grab and fire. Hate to say maybe a sidewalk commando. Thompson would be much better concealed without stock. Just my opinion. -
Form 10 is registration to police or military for their use only. The gun is not transferable to civilians , only other government agencies.
-
Usually get issues at the book store ( Barnes & Noble ) never a problem. Last issue I bought was for February 2021. Never saw March issue and now no April issue. Also sometimes recent back issues available on Ebay. None their either. Anything happen ?
-
-
Muzzle device came from a post war brake that Mel Johnson’s company put on sporter rifles back in the 50’s. It’s only the front end, has been cut down and modified. See original pics. Originals were threaded on and held by a set screw. Does that ring on yours turn or can you push or pull it ? May be attached by a depressed ball and spring , don’t know just a thought.
-
Forgot this big dealer Roger Cox - Law Enforcement Ordnance
-
Hey I remember looking foreword to every Issue of Shotgun News back in the seventies. Mostly looking for machine gun ads. Back then you had to read it cover To cover because all ads were mixed together not sectioned like today. Some guys had 1/4 page ads or 1/2 page ads that stood out. The ones I can remember were LES , C. Earl, R J Perry, Tommy St Charles, Fred Rexer, Chuck Hudak , these were the big guys. Had 10 to 20 guns for sale. There were smaller guys 1 or 2 guns for sale that listed only occasionally where the big guys were regular posters. Sorry if I missed a couple , but these guys were the 70’s. In the 80’s a lot more dealers and collectors popped up and so did prices. Feel free to mention any 70’s guys I forgot. They were great times for the hobby not like today. Transfers were 90 days or less all the time for years on form 4. No computers , today with computers should be super fast 4 to 6 weeks not 8 months to a year.
-
When a dollar was worth a dollar !
-
A Short Tribute to Actor George Segal
M17ap replied to gijive's topic in Thompson Submachine Gun Message Board
-
Seems like a slow week so....
M17ap replied to Jetstreamer's topic in Thompson Submachine Gun Message Board
-
Seems like a slow week so....
M17ap replied to Jetstreamer's topic in Thompson Submachine Gun Message Board
Looks like same Thompson used by Wallace Berry in a 1930’s prison movie. Might be called Big House. Not sure but several good shooting scenes Berry firing gun. Tube is a scope. -
lewis gun blueprint
M17ap replied to BillyDixon's topic in Bren Light Machine Gun & Lewis Gun Message Board
Try a copy center like Kinkos or Staples. They have machines that photo copy and can enlarge your print. Should be easy and not a problem. HTH