Joseph_T Posted May 26, 2017 Report Share Posted May 26, 2017 (edited) What is the value of the following Thompson 1928 Parts? (not 1928a1) Upper receiver with complete lyman sightLower receiver, matching numbercomplete trigger mechanism (no trigger frame)mag release with no holefire control group checkered with hole in the safety leverflat extractorcompensator with no bullet logo on the side. i have a spare set of these that im looking to sell but dont know the correct value. Thanks in advance. http://i68.tinypic.com/kdk8ys.jpg Edited May 27, 2017 by Joseph_T Link to comment Share on other sites More sharing options...
Bridgeport28A1 Posted May 27, 2017 Report Share Posted May 27, 2017 (edited) In the photo posted I see a trigger frame and what appears to be an intact receiver. Those two items in the photo are not included in the valuation question? In the USA or somewhere else? Edited May 27, 2017 by Bridgeport28A1 Link to comment Share on other sites More sharing options...
Joseph_T Posted May 27, 2017 Author Report Share Posted May 27, 2017 (edited) Well is not a bad idea to give a value in the US market to these aswell if possible. They also matching numbers Edited May 27, 2017 by Joseph_T Link to comment Share on other sites More sharing options...
ppgcowboy Posted May 27, 2017 Report Share Posted May 27, 2017 (edited) I think a person can get a fine $250,000 and or 10 years in prison for the receiver. A wild ass guess for the other parts would be, the trigger housing can be sold in the $550 to $650 range because of the no hole mag catch and the hole safety lever, the ejector I have no idea, the actuator about $110, the blish lock about $45, and no idea on the compensator. But I am probably wrong on all count, except the fine and prison time, but I could be wrong on that too. Edited May 27, 2017 by ppgcowboy Link to comment Share on other sites More sharing options...
huggytree Posted May 27, 2017 Report Share Posted May 27, 2017 i assume you'd be stripping parts out of the receiver...milled ejector is worth $100...i got a NOS one on line for $110 earlier this year if its a cutts type 2 id be a buyer for a fair price i assume you'd sell the lower as a whole part...not part it out Link to comment Share on other sites More sharing options...
ron_brock Posted May 27, 2017 Report Share Posted May 27, 2017 Guys, I don't believe Joseph is in the US, hence the receiver. Somewhere in Europe, if I recall. Ron Link to comment Share on other sites More sharing options...
TD. Posted May 27, 2017 Report Share Posted May 27, 2017 Given the condition of the finish on the parts I do not believe any of the parts would bring top dollar if in the USA. The no-hole magazine catch and knurled fire control levers are the best parts in my opinion. Next comes the milled ejector and possibly the compensator, but that would be a much harder sell. The grip mount may also have some value depending on condition. Everything else is readily available in the USA. Buying machine gun parts outside the USA is not something most buyers will consider. This appears to be an early Savage Thompson, one with a New York, NY address. I believe it would be worth more as a complete deac than as a parts guns. If mine, that is how I would market it. Show the right side of the receiver! Can you provide a picture of the serial number on the frame? Early Savage Thompsons are not common. I would like a picture for my reference collection. Thanks! Link to comment Share on other sites More sharing options...
Joseph_T Posted May 27, 2017 Author Report Share Posted May 27, 2017 (edited) Yes TD! i had problem yesterday with the website for uploading pictures, So ranging on the 100$ for the milled ejector... what about other parts?i think it will be easier to sell the trigger frame components apart from the trigger frame itself. So yes Davei sell them separately http://i66.tinypic.com/9h4e4x.jpg http://i63.tinypic.com/zpb0p.jpg Edited May 27, 2017 by Joseph_T Link to comment Share on other sites More sharing options...
Balder Posted May 27, 2017 Report Share Posted May 27, 2017 The serial number puts it right in the range of the early 1940 deliveries to the UK. Balder Link to comment Share on other sites More sharing options...
huggytree Posted May 27, 2017 Report Share Posted May 27, 2017 with some better pics id make you an offer on the lower and the comp. its a parts kit for my gun, but the finish looks poor Link to comment Share on other sites More sharing options...
TD. Posted May 27, 2017 Report Share Posted May 27, 2017 I agree with Balder. This could certainly be one of the cash and carry Thompson guns purchased by the British in 1940. Joseph_T,Are there any British or military markings on the receiver, especially on the front where the barrel attaches? All good stuff! Link to comment Share on other sites More sharing options...
Joseph_T Posted June 6, 2017 Author Report Share Posted June 6, 2017 (edited) Finally received the packet and made some pictures, well finish is almost all off on all parts except a few...but the good thing is that the steel its actually very good, there is virtually almost no pitting at all, for this reason i was thinking about hi polishing re bluing the 1928..whats your tought about it?Regarding other parts, all the internals are Savage, with the exception of the mag catch, it is checkered, with no hole, but not marked.. is this a signal that its a Colt one? And on the compensator, i have seen some pictures of type 2 compensator, but noone of them also had the Thompson logo stamped above the Cutts logo.. if type 4 is the most common and type 2 its made like described before, i guess thats somehow a type 3?? Edited June 6, 2017 by Joseph_T Link to comment Share on other sites More sharing options...
Joseph_T Posted June 6, 2017 Author Report Share Posted June 6, 2017 (edited) Is it possible that some of the trigger parts are nickel covered? Edited June 6, 2017 by Joseph_T Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now